🧱 Element Optics XT Mounts – Picatinny Low 1"
Low-profile. Lightweight. Locked-in.
🔧 Built for Precision Without the Bulk
If you're running a 1" tube scope and want to keep your optic as close to the bore as possible, the XT Low 1" Picatinny Mounts are your go-to solution. Designed for shooters who value a tight cheek weld and sleek profile, these mounts offer rock-solid performance in a minimalist package.
Tube Diameter: 1" — fits most classic and modern hunting scopes
Mounting Base: Picatinny — universal fit for ARs, bolt guns, and air rifles
Height: Low — 21.9mm (0.86") from rail to centerline
Material: 6061-T6 Aircraft-Grade Aluminum — lightweight and corrosion-resistant
🧠 Engineered for Real-World Use
These aren’t just budget rings—they’re precision-machined, torque-rated, and built to hold zero under recoil. Whether you're mounting on a springer, PCP, or rimfire, the XT Mounts deliver repeatable performance every time.
Weight (Pair): 86.2g (3.0 oz)
Max Torque (Rings): 18 in-lbs (2.0 Nm)
Max Torque (Base): 35 in-lbs (4.0 Nm)
Tools Required: T15 Torx (standard with most kits)
Finish: Matte black anodized — non-reflective and durable
💪 Why Shooters Choose XT Mounts
Low-profile design — ideal for scopes with smaller objectives
Perfect for airguns and rimfires — springer-rated durability
Affordable — only at $89 AUD
Backed by Element’s reputation for quality and support
🎯 Ideal For:
Rimfire rifles and airguns with 1" tube scopes
Shooters who prefer a lower optic height for better cheek weld
Lightweight hunting or plinking setups where every ounce counts
The Hawke Match Mount 1" 1 Piece 9-11mm High are precision-engineered mounts designed to securely hold your scope in place while preventing damage.
Details:
Product Range: Match Ring Mount
Model: High
Ring Size (Diameter): 1 Inch
Rail: 9-11mm / 3/8”
Configuration: 1
Fixings (Top): Double Hex (3mm)
Thread (Top): 8-32
Fixings (Rail): Quad Hex (4mm)
Thread (Rail): M5x0.8
Internal Cushion: Yes
Retractable Recoil Stop Pin: Yes
Height (in): 2
Height (mm): 51
Weight (oz): 5.3
Weight (g): 150
These mounts are made from high-grade aluminum, anodized in matte black. The reversible side plate allows compatibility with both 9-11mm and 3/8" rails. The double hex screws ensure a secure fit for your scope, and the internal cushion tape prevents marking and damage. Additionally, the retractable recoil stop pin adds extra stability.
If you’re looking for a reliable mount for your 1" scope, the Hawke Match Mount 1" 1 Piece 9-11mm High is a great choice! Happy shooting! 🎯🔭
Hawke Precision Steel Ring Mounts – 1", Medium Height, Quick Release
The Hawke Precision Steel Ring Mounts (1", Medium, Quick Release) are robust, high-quality scope rings designed for maximum strength, repeatable zero retention, and fast optic removal. Built from solid steel and engineered for Weaver/Picatinny rails, these rings are ideal for hunters, tactical shooters, and precision marksmen who demand durability and convenience.
Key Features:
1" Tube Compatibility: Fits standard 1-inch maintubes
Medium Height Profile: Ideal for scopes with up to 44mm objective lenses (depending on rifle and rail height)
Quick Release Lever: Enables fast mounting/dismounting without tools
Solid Steel Construction: Precision-machined for strength and alignment
Double Torx Screws: Secure top caps for consistent clamping force
Matte Black Finish: Non-reflective and corrosion-resistant
Specifications:
Feature
Details
Tube Diameter
1" (25.4 mm)
Mount Type
Weaver / Picatinny
Height
Medium (approx. 41 mm total)
Material
Solid steel
Fixings
Double Torx screws
Quick Release
Yes (lever style)
Weight
159 g / 5.6 oz (pair)
Item Number
23011
Performance and Application
These mounts are perfect for field use, range sessions, or multi-optic setups where quick changes are needed without sacrificing zero. The steel body and precision machining ensure long-term durability and alignment, while the quick release levers make optic swaps fast and tool-free.
The Hawke Match Ring Mounts are designed for Weaver rails and come in a 1-inch medium height configuration. They are built to securely hold your scope in place while preventing damage with internal cushion tape.
Key features:
Double hex screws for a firm grip
Weaver rail with crossbar for added stability
High-grade aluminum with a matte black anodized finish
Compatible with BRNO rifles and other Weaver-mounted scopes
The Hawke Extension Rings 9-11mm High 1" EXT Double Screw are designed for mounting scopes on rifles with 9-11mm dovetail rails. These rings feature a high-profile design to accommodate scopes with larger objective lenses. One of the rings includes a 1-inch extension, allowing for better eye relief and positioning.
Key Features:
Material: High-grade aluminum with a matte black anodized finish for durability and a sleek appearance.
Mounting System: Fits 9-11mm dovetail rails, ensuring compatibility with various airguns and rifles.
Secure Hold: Double hex screws on both the rail and top cap provide a firm grip on the scope.
Recoil Stop Pin: Helps prevent movement due to recoil, ensuring stability.
Internal Cushion Tape: Protects the scope from scratches and damage.
Height: 50mm (1.9 inches).
Weight: 113g (4 oz.).
Rounded Edges: Designed to prevent scope damage during installation.
These rings are ideal for shooters who need extra extension for proper eye relief and a secure mounting system for their optics.
Warne 1" Rings for CZ 550 with 19mm Dovetail are available in both Medium and High profiles, offering a rock-solid, recoil-resistant mounting solution for 1-inch scopes on CZ 550 rifles.
🔧 Product Overview
These rings are part of Warne’s Permanently Attached (PA) series, specifically designed to fit the 19mm integral dovetail receiver on CZ 550 rifles. They are machined from solid steel and built to handle heavy recoil while maintaining zero.
📏 Profile Options
Profile
Model Number
Height (Base to Ring Center)
Fits Objective Size
Medium
1BM
~0.375" (9.5 mm)
Up to 42mm
High
1B1M
~0.525" (13.3 mm)
Up to 52mm
Heights are approximate and may vary slightly depending on scope design and barrel contour.
🛠️ Key Features
Tube Diameter: 1 inch
Mount Type: Direct-to-receiver (19mm CZ dovetail) – no base required
Material: Solid steel – CNC machined
Finish: Matte black oxide
Design: Horizontally split rings with 4 Torx T-15 screws per ring
Recoil Control: Square recoil control key for positive engagement with receiver
Torque Specs:
Cap screws: 25 in-lbs
Clamp screws: 30–35 in-lbs
✅ Ideal For:
CZ 550 rifles with factory 19mm dovetail
Medium to large objective scopes (40–52mm)
Precision hunting or long-range shooting setups
Shooters needing a rugged, no-shift mounting system
The Helix-Weaver Precision Match Rings (1-inch) are high-grade scope mounting rings available in Low, Medium, and High profiles, designed for Weaver-style bases and precision shooting setups.
🔧 Key Specifications:
Profile
Centerline Height
Use Case
Low
~0.76" (19.3 mm)
Ideal for low-profile scopes or bolt guns with minimal objective clearance
Medium
~0.90"–1.00"
Suitable for standard 40–44mm objective scopes
High
~1.20"–1.35"
Best for large objective scopes (50mm+) or rifles with raised cheek welds
🛠️ Build & Features:
Tube Diameter: 1 inch
Mounting Style: Weaver-compatible base
Material: CNC-machined 7075-T6 aluminum or 6061 aircraft-grade (varies by model)
Finish: Type III hard anodized matte black
Torque Specs:
Cap screws: 15–18 in-lbs
Base screws: 45–50 in-lbs
Design: Horizontally split rings for easier mounting and alignment
Weight: Approx. 1.4 oz per ring (Low profile)
Extras: Serialized pairs, vibratory tumbled, bead-blasted for uniform finish
✅ Compatibility Notes:
Fits 1-inch scope tubes only
Designed for Weaver-style rails (not Picatinny unless specified)
Ideal for precision rifles, varmint setups, or long-range platforms where repeatable zero and tight tolerances matter
The Hawke Ring Mounts 9-11mm 1 Inch Medium Double Screw are precision-engineered mounts designed to securely hold your scope in place. Here are the key features:
High-Grade Aluminum Construction: Made from high-grade aluminum, these mounts are durable and lightweight.
Double Hex Screws: Equipped with double hex screws, the mounts ensure a firm and secure hold on your scope.
Internal Cushion Tape: The internal cushion tape prevents marking and damage to your scope.
Reversible Side Plate: The reversible side plate allows for compatibility with both 9-11mm and 3/8" rails.
Retractable Recoil Stop Pin: The mounts feature a retractable recoil stop pin for added stability.
Medium Profile: The medium profile design provides a good balance between height and stability.
Matte Black Finish: The anodized matte black finish offers a sleek and professional look.
These ring mounts are perfect for hunters, sport shooters, and anyone looking for a reliable and secure way to mount their scope.
AFFORDABLE, MADE IN USA QUALITY
Our Vapor? line of mounts were developed and engineered to provide you with a strong and economical mounting solution that outperforms other mounts in their class.
Time-tested designs
Easy to install
Field proven performance
Lightweight aluminum
Lifetime warranty
Designed and Made in USAAFFORDABLE, MADE IN USA QUALITY
Our Vapor? line of mounts were developed and engineered to provide you with a strong and economical mounting solution that outperforms other mounts in their class.
Time-tested designs
Easy to install
Field proven performance
Lightweight aluminum
Lifetime warranty
Designed and Made in USA
