RIFLE BASES

The UTG .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor is a handy accessory for converting your .22 or airgun dovetail accessory rail to the more standard Picatinny or Weaver-style rail commonly used on most weapons. Compatibility: Designed to fit .22 caliber firearms and airguns with dovetail rails. Function: Allows you to attach Picatinny or Weaver-style mounts and accessories to your airgun or .22 rifle with dovetails. Design Features: Spring Tension Retraction and Expansion: The top slot of the adapter features a unique spring tension design, making it easy to snap into place on your rail. Low Profile and Lightweight: The adapter is incredibly lightweight and sits close to the receiver of your firearm, allowing for more accurate zeroing when mounting scopes and other accessories. Precise Alignment: Provides precise and repeatable alignment every time you use it. Easy Installation: Simple to install and uninstall. Specifications: Finish: Matte Black Material: Aluminum Length: 1 inch Weight: 0.18 oz Gun Rail Compatibility: Weaver, Picatinny Width: 0.93 inch Height: 0.24 inch Set Includes: Two adapters. Whether you’re upgrading your airgun or enhancing your .22 rifle, the Leapers UTG Dovetail to Picatinny/Weaver Low Pro Snap-in Adaptor expands the possibilities of your dovetail rail. 

Read more less

The Sako S20 Optilock 20 MOA mount is designed to enhance your Sako S20 r*ifle's optics mounting capabilities. Purpose: The Sako S20 piece, while magnificent, has some limitations in its original Picatinny rails. Here are the issues: Zero Inclination: The original rails lack inclination (they are 0 MOA flat). This means that half of your scope’s adjustment range becomes useless. For most scopes and calibers, this limitation prevents shooting beyond approximately 800 meters without compensating. Eye Relief Concerns: The rear rail segment is positioned rather close to the eye. Scopes with long ocular parts (like the S&B PMII 3-20x) may have insufficient eye relief for comfortable shooting. Non-Replacement: These rails are machined with the receiver and cannot be easily replaced. The Optilock Solution: The Sako Optilock mounting base addresses these issues effectively. Features: Inclination: The Optilock base comes in various inclinations, including the 20 MOA version (there’s also mention of a 30 MOA version, although I haven’t seen it in real life). Quality: Precision machining ensures flawless quality. Height and Weight: The added height and weight are reasonable. Compatibility: The positioning options allow accommodating almost any scope, regardless of ocular length. Proprietary Rings: Keep in mind that the rings that go on the Optilock base are proprietary and need to be purchased along with the base. In summary, while the Sako S20’s original rails may have their quirks, the Optilock 20 MOA mount provides an efficient fix for optimal scope mounting. If you’re looking to optimize your S20 r*fle, this mount is a solid choice! 🎯🔭

Read more less

Talley Manufacturing offers CZ Picatinny Rails designed specifically for CZ Rimfire Rifles, including models such as the CZ 452 American, CZ 452 European, CZ 455, CZ 457, and CZ 513. These Picatinny rails are precision-machined from high-grade 7000 series alloy and protected with hard-coat anodizing to ensure durability.  Details: Material: Machined entirely from high-grade 7000 series alloy. Craftsmanship: Protected with a hard-coat anodizing to 65 Rockwell, ensuring longevity. Compatibility: Designed to fit CZ Rimfire Rifles, including CZ 452 American, CZ 452 European, CZ 455, CZ 457, and CZ 513. Mounting Platform: Provides a mounting platform for all optics mounts designed according to the MIL-STD-1913 Pic Rail specifications, including Talley Picatinny scope mounts. Available Options: Standard Model: Available in 0 and 20 MOA options. Dimensions and Weights (CZ 457): Rear Height: 1.8 inches Hole 1 ↔ 2: 2.36 inches Hole 2 ↔ 3: 1.07 inches Hole 3 ↔ 4: 5.37 inches Weight: 1.2 oz (Standard) or 1.3 oz (20 MOA) Torque Recommendations: The nylon-tipped tension screws should be “snug” to create tension without marring the surface of the CZ Scope Base. Talley Guarantee: All Talley products come with a money-back guarantee Whether you’re looking for a tactical scope ring, a modern sporting ring, or a traditional scope ring with a Picatinny mounting system, Talley Manufacturing has Pic Rails for all applications and firearms enthusiasts. Remember, nothing is tougher than a Talley! 🌟🔭🔫

Read more less

Warne Vapor rails are designed to offer shooters an affordable and reliable mounting platform manufactured for your specific firearm. The WARNE WINCHESTER XPR SA VAPOR PICATINNY RAIL offers 20MOA of elevation built-in for longer distance shooting.  Fits: Winchester XPR Short Action, w/8-40 screw receiver Precision CNC machined from 6061/T6 aluminum  Mil-Spec hard coat anodized finish for abrasion and corrosion resistance. Self-centering tapered T-15 Torx screws. Fits Picatinny & weaver style rings and are NATO-STANAG compatible.

Read more less

American Made, Lightweight 7000 Series Aluminum Alloy Fully CNC Machined Hard-coat anodizing to 65 Rockwell Designed in accordance with the MIL-STD-1913 Pic Rail specifications Available in 0 and 20MOA. Includes mounting screws and wrench. (1/4 6-48 Screws / T-15) Designed to fit Tikka T3 and Tikka T3X bolt action rifles. Tikka T3 Picatinny Rail – Product Dimensions and Weights    MOA Rear Height1 Hole2 1 ↔ 2 Hole 2 ↔ 3 Hole 3 ↔ 4 Front Height3 Overall Length Weight Standard .380″ .858″ 3.246″ .858″ .380″ 7.46″ 2.4oz. 20MOA .380″ .858″ 3.246″ .858″ .350″ 7.46″ 2.3oz.   1 The Rear height is measured at hole 1; from the top of the action to the top of the rail. 2 Hole 1 is closest to the shooter and Hole 4 is closest to the muzzle. Hole spacing was measured center to center. 3 The Front Height is measured at hole 4; from the top of the action to the top of the rail.  Torque Recommendations for the Tikka T3 Tikka T3 Picatinny Rail to Action: Torque can depend on the receiver. Please check with the rifle manufacturer (Tikka) to verify the allowable torque in the receiver. Always make sure your torque wrench is calibrated, Talley Mfg is not responsible for damage caused to scopes or firearms due to over-torquing  Should I use Loctite on my Tikka T3 pic rail? Although not always necessary, using Loctite for the screws going into the receiver is perfectly fine. We do not recommend using anything stronger than Loctite Blue 242. We do not recommend using Loctite on the ring screws. Always test fit before applying any Loctite. Tikka T3 Picatinny Rail Scope Ring Options One of the great benefits of the Picatinny rail option is that when designated a “Picatinny Rail”, the dimensions follow an established industry standard (MIL-STD-1913 rail). As a result, any scope ring designed to fit a true Picatinny Rail will work on this Tikka T3 Pic rail. Following the Picatinny rail spec, Talley Manufacturing offers a variety of Picatinny Ring options to meet the needs of all shooters.  As we look around the world of rifle scopes, we are seeing many manufacturers shortening up the mounting surfaces of scopes. These shorter distances combined with the fixed mounting location on the rifle tend to limit the range of eye relief adjustments. This is one of the primary reasons many find their best option to be the Picatinny rail. With established dimensions that repeat down the length of the Tikka T3 Pic rail, the shooter is given the greatest flexibility in eye relief and mounting options over traditional systems such as the weaver base option. The Tikka T3 Pic Rail is a simple solution to achieve the best eye relief when mounting a scope, red-dot or night optic regardless of the mounting surface distance.  THE TALLEY GUARANTEE NOTHING IS TOUGHER THAN A TALLEYThe Talley Guarantee: At Talley Manufacturing, we place our customers first. All our products carry a money-back guarantee. If you are not completely satisfied, we make sure you will be. We want you to know you’ve just purchased the best.

Read more less

Warne Vapor rails are designed to offer shooters an affordable and reliable mounting platform manufactured for your specific firearm. The WARNE WINCHESTER XPR LA VAPOR PICATINNY RAIL 20MOA offers 20MOA of elevation built-in for longer-distance shooting.  Fits: Winchester XPR Long Action, w/8-40 screw receiver Precision CNC machined from 6061/T6 aluminum  Mil-Spec hard coat anodized finish for abrasion and corrosion resistance. Self-centering tapered T-15 Torx screws. Fits Picatinny & weaver style rings and are NATO-STANAG compatible.

Read more less

Warne Vapor rails are designed to offer shooters an affordable and reliable mounting platform manufactured for your specific firearm. The V4T3-20MOA offers 20MOA of elevation built in for longer distance shooting.  Fits: Tikka T3, T3x, improper height w/handguard on T3x Tac A1 Precision CNC machined from 6061/T6 aluminum  Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance. Self-centering tapered T-15 Torx screws. Fits Picatinny & weaver style rings and are NATO-STANAG compatible.

Read more less

Nightforce Standard Duty bases are a quality, affordable solution for ensuring that your scope is firmly mounted to your rifle. These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.

Read more less

Nightforce Standard Duty bases are a quality, affordable solution for ensuring that your scope is firmly mounted to your rifle. These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.

Read more less

Nightforce Standard Duty bases are a quality, affordable solution for ensuring that your scope is firmly mounted to your rifle. These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized.

Read more less