🧱 Element Optics XT Mounts – Picatinny Low 1"
Low-profile. Lightweight. Locked-in.
🔧 Built for Precision Without the Bulk
If you're running a 1" tube scope and want to keep your optic as close to the bore as possible, the XT Low 1" Picatinny Mounts are your go-to solution. Designed for shooters who value a tight cheek weld and sleek profile, these mounts offer rock-solid performance in a minimalist package.
Tube Diameter: 1" — fits most classic and modern hunting scopes
Mounting Base: Picatinny — universal fit for ARs, bolt guns, and air rifles
Height: Low — 21.9mm (0.86") from rail to centerline
Material: 6061-T6 Aircraft-Grade Aluminum — lightweight and corrosion-resistant
🧠 Engineered for Real-World Use
These aren’t just budget rings—they’re precision-machined, torque-rated, and built to hold zero under recoil. Whether you're mounting on a springer, PCP, or rimfire, the XT Mounts deliver repeatable performance every time.
Weight (Pair): 86.2g (3.0 oz)
Max Torque (Rings): 18 in-lbs (2.0 Nm)
Max Torque (Base): 35 in-lbs (4.0 Nm)
Tools Required: T15 Torx (standard with most kits)
Finish: Matte black anodized — non-reflective and durable
💪 Why Shooters Choose XT Mounts
Low-profile design — ideal for scopes with smaller objectives
Perfect for airguns and rimfires — springer-rated durability
Affordable — only at $89 AUD
Backed by Element’s reputation for quality and support
🎯 Ideal For:
Rimfire rifles and airguns with 1" tube scopes
Shooters who prefer a lower optic height for better cheek weld
Lightweight hunting or plinking setups where every ounce counts
The Hawke Match Ring Mounts are designed for Weaver rails and come in a 1-inch medium height configuration. They are built to securely hold your scope in place while preventing damage with internal cushion tape.
Key features:
Double hex screws for a firm grip
Weaver rail with crossbar for added stability
High-grade aluminum with a matte black anodized finish
Compatible with BRNO rifles and other Weaver-mounted scopes
Warne 1" Rings for CZ 550 with 19mm Dovetail are available in both Medium and High profiles, offering a rock-solid, recoil-resistant mounting solution for 1-inch scopes on CZ 550 rifles.
🔧 Product Overview
These rings are part of Warne’s Permanently Attached (PA) series, specifically designed to fit the 19mm integral dovetail receiver on CZ 550 rifles. They are machined from solid steel and built to handle heavy recoil while maintaining zero.
📏 Profile Options
Profile
Model Number
Height (Base to Ring Center)
Fits Objective Size
Medium
1BM
~0.375" (9.5 mm)
Up to 42mm
High
1B1M
~0.525" (13.3 mm)
Up to 52mm
Heights are approximate and may vary slightly depending on scope design and barrel contour.
🛠️ Key Features
Tube Diameter: 1 inch
Mount Type: Direct-to-receiver (19mm CZ dovetail) – no base required
Material: Solid steel – CNC machined
Finish: Matte black oxide
Design: Horizontally split rings with 4 Torx T-15 screws per ring
Recoil Control: Square recoil control key for positive engagement with receiver
Torque Specs:
Cap screws: 25 in-lbs
Clamp screws: 30–35 in-lbs
✅ Ideal For:
CZ 550 rifles with factory 19mm dovetail
Medium to large objective scopes (40–52mm)
Precision hunting or long-range shooting setups
Shooters needing a rugged, no-shift mounting system
The Helix-Weaver Precision Match Rings (1-inch) are high-grade scope mounting rings available in Low, Medium, and High profiles, designed for Weaver-style bases and precision shooting setups.
🔧 Key Specifications:
Profile
Centerline Height
Use Case
Low
~0.76" (19.3 mm)
Ideal for low-profile scopes or bolt guns with minimal objective clearance
Medium
~0.90"–1.00"
Suitable for standard 40–44mm objective scopes
High
~1.20"–1.35"
Best for large objective scopes (50mm+) or rifles with raised cheek welds
🛠️ Build & Features:
Tube Diameter: 1 inch
Mounting Style: Weaver-compatible base
Material: CNC-machined 7075-T6 aluminum or 6061 aircraft-grade (varies by model)
Finish: Type III hard anodized matte black
Torque Specs:
Cap screws: 15–18 in-lbs
Base screws: 45–50 in-lbs
Design: Horizontally split rings for easier mounting and alignment
Weight: Approx. 1.4 oz per ring (Low profile)
Extras: Serialized pairs, vibratory tumbled, bead-blasted for uniform finish
✅ Compatibility Notes:
Fits 1-inch scope tubes only
Designed for Weaver-style rails (not Picatinny unless specified)
Ideal for precision rifles, varmint setups, or long-range platforms where repeatable zero and tight tolerances matter
