The LEE CASE LENGTH GAUGE 375 WINCHESTER is a tool used in the reloading process of the .375 Winchester cartridge.
Key features:
It provides a precise and easy way to trim the case to the correct length and square the case mouth.
It is used in combination with the Lee Cutter and Lock Stud or Lee Zip Trim, which are sold separately.
The gauge is made from hardened steel.
Proper overall case length is the starting point of perfectly sized cartridges, which will result in better accuracy.
The Lee R20 Universal Shell Holder is designed for use with the 22 Hornet, 22 K-Hornet, 17 Hornet, 7.65mm French Long, and similar cases. It can be used in most brands of reloading presses.
This shell holder is machined to close tolerances for maximum accuracy, making it a reliable choice for your reloading needs. If you’re using Auto Prime, you would need a different shell holder, specifically the #20 Auto Prime Shell Holder.
Please ensure to use the correct shell holder for your specific reloading setup to ensure safety and accuracy. 🛠️🔫
The Lee Auto Prime Hand Priming Tool is a great tool for handloaders who want to prime each brass case manually. It utilizes special shellholders that fit only the Auto Prime, not reloading presses. We have 12 shellholder sizes available to suit the needs of all reloaders.
There is no loading system that will load more accurate ammunition than Lee Collet Dies. A collet squeezes the case neck against a precision mandrel for a perfect bullet fit with minimun run-out. No case lube is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the dies. Maximum accuracy is usually achieved by seating the bullet out for enough to touch or almost touch the rifling. This provides the shot start pressure normally supplied by the crimp. That's why a dead length bullet seater is included to complete the most accurate reloading system ever made. These dies size only the neck to preserve the perfect fit of fire forming. Only reload cases that have been fired in your gun. No recommended for autoloaders, slide or lever action guns.
