The Bohning Fletch-Tite Platinum is a solvent-based adhesive designed for fletching arrows. It has been an industry standard for over 70 years and is known for its flexible bond, which absorbs shock and prevents cracking or brittleness after repeated impacts. Key Features: Works on all shaft types, including carbon, wood, aluminum, and fiberglass. Ideal for vanes, feathers, and swedged nocks. Clamp time: 5 minutes; Cure time: 24 hours (48 hours in humid environments). Easy cleanup—excess glue can be scraped off with a fingernail. Not recommended for refrigeration—store tightly sealed to prevent premature drying Available size: 3/4 oz tube

Read more less

The Bohning Helix Tower Fletching System is a precision jig that lets you fletch three vanes at once with a 3° helical offset—cutting your fletching time by two-thirds while ensuring perfect 120° spacing. It’s ideal for carbon, aluminum, and crossbow bolts. 🧰 Key Features Fletches 3 vanes simultaneously at 120° spacing Helical arms apply a consistent 3° right or left offset Compatible with vanes up to 2.25" in helical mode, and up to 4" with offset or straight arms (in complete kit) Includes 5 interchangeable center posts for: Standard nocks Pin nocks F nocks (.164 ID) A nocks (.201 ID) Crossbow bolts Pressure rings accommodate all arrow diameters Spacer plates add .025" (6mm) clearance between nock and vane Clamp release tape ensures clean vane adhesion Material: Engineering-grade composite—durable and acetone-safe for cleaning 📦 Variants Helix Tower (Standard): Includes 3 helical arms for vanes up to 2.25" Complete Triple Tower System: Includes helical, offset, and straight arms for full customization 🖼️ Product Image Here’s a verified image of the Bohning Helix Tower Fletching System: Image card displayed above ✅ 🎯 Performance Highlights Reduces fletching time by 66% compared to single-vane jigs Perfect for bulk arrow prep, team setups, or shop use Consistent vane placement improves arrow flight and grouping Compact footprint fits easily on workbenches or travel kits

Read more less

The Blazer® Vane  is designed for steering fixed-blade broadheads and has been the #1 hunting vane for over 10 years! It measures 2″ (50.8mm) in length,  0.53″ (13.5mm) in height, and weighs an average of 6.0 grains (388.8 mg). True Color printed Blazers weigh an average of 6.1 grains (395 mg). Like all Bohning vanes, the base of the Blazer Vane is pre-primed for optimal adhesion. The Blazer® Vane has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the “knock-off”, “wanna-be”, “copy-cat” vanes combined! This is the vane that, hands down, out-performs them all!  It’s designed for fixed-blade broadheads but is also perfect for crossbows and 3D archery. The Blazer® Vane, with its unique design, begins steering and correcting immediately – making believers out of bow hunters and target shooters alike! The combination of the steep leading edge angle and its material properties enables air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow also makes the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. We recommend fletching Blazer® vanes with a helical for perfect results. What’s in your quiver? If it doesn’t say Blazer® and carry the Bohning® logo, it’s not a REAL BLAZER.  Only Bohning makes the Blazer Vane, and we proudly print our name on each one. It’s not just the profile that sets us apart from look-a-likes, our proprietary material has been tested in extreme conditions to make sure it doesn’t fail you when it really counts. Don’t be fooled by copycats. If it doesn’t say Bohning, it’s not a Blazer and it won’t perform like one. Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

Read more less

Bohning Fletching Jig – Right Wing Consistent fletching. Magnetic precision. Built for custom arrow setups. ⚙️ Key Features Right Wing Clamp – Designed specifically for right helical or offset feather/vane placement Magnetic Quick-Set Clamp – Holds vanes securely and aligns consistently with minimal effort Adjustable Nock Receiver – Allows for 3- or 4-fletch configurations with precise indexing Durable Composite Construction – Lightweight yet rugged enough for repeated use Tool-Free Adjustments – Easy offset and angle tweaks without needing extra gear Compact Design – Fits easily in bow cases or workbenches for mobile refletching Easy Cleanup – Compatible with acetone for removing adhesive residue 🧭 Field Use Highlights Ideal for traditional archers, bowhunters, and target shooters Compatible with carbon, aluminum, and wood shafts Trusted by arrow builders for repeatable results and tight tolerances Perfect for custom feather setups, especially when dialing in helical spin for broadhead stabilization.

Read more less